| Home/Disclaimer
Read Me First
Common Playstation Problems and fixes/FAQ
How to Clean Your PS2 Laser
Precision Laser Voltage Adjusting with O'scope
How to Adjust Voltage for your Laser
Cd Tray Alignment
Find Your PS2 Verion
Power Supply Trouble Shooting
Disk Read Error
Disk Read Error Cont.
Taking Apart Your PS2 Guide
Replacement Parts And Fuse Diagrams
|
|
|
The CD Tray
After i knocked my PS2 over (from having it in the vertical postion) they cd tray became stuck.
Heres what you need to do: PLEASE NOTE I HAVE ONLY DONE THIS ONCE
1.) Take off the ps2 cover. You will then see 4 srews, take tem off of the Cd-Rom Drive, and remove the lid.
2.) Now pull the tray out as far as it will go, so it is dilsoged from the track. It may take a little force.
3.) Once the tray is loose, lift it up, away from the aligment track. There will be a small round piece of plastic poking up. Put your finger on it and slide it all the way to the left then right.
4.) Replace the tray and manually and gently push the tray until it is fully back into place, you will hear it click when it LOCKS into the gear. Then put everything back and your done.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
